Everbuild EVGF7 Gun Grade Expanding Foam 750ml (12 Cans)

Everbuild EVGF7 Gun Grade Expanding Foam 750ml (12 Cans)\r\nGun Grade Expanding Foam is a quick setting polyurethane-based foam which expands greatly on application and yields up to 50 times original can contents. It fills irregular gaps, fixes framework, insulates and sound deadens. Gun Grade Expanding Foam is designed for professional use in conjunction with Gun Foam Applicators.\r\nEVGF7 Application:\r\nFilling\r\n\r\nGaps around pipe entries through walls.\r\nGaps around window frames, door frames.\r\nElectrical wire chasing prior to plastering\r\nDeep joints prior to applying sealant or plaster\r\nIrregular gaps in stone, brick, concrete or plaster\r\n\r\nFixing\r\n\r\nDoor frames\r\nTimber structures\r\nWindow sills and thresholds.\r\nWindow frames\r\n\r\nInsulating\r\n\r\nBehind cladding to exterior walls.\r\nBehind soffit and barge boards\r\n\r\nEVGF7 Features:\r\n\r\nQuick setting can be cut, sawn or plastered in 1 hour\r\nFills irregular and broad gaps where most conventional fillers would fail\r\nPossesses insulating and sound deadening properties\r\nDesigned for professional use in conjunction with Gun Foam Applicators\r\n\r\nEVGF7 Specification:\r\n\r\nExpansion: 45 litres (750 ml can)\r\nCell Structure: Medium fine\r\nTemp Res Of Cured Bead: Long Term: -40 to +80 C;Short Term: -40 to +100 C\r\nBuilding Material: Class – B3\r\nPackaging: 750 ml tin\r\nShelf Life: 12 months in original containers at stated storage temperatures.\r\nStorage Conditions: Store upright between 15 C and 20 C. Pressurized container. Protectfrom sunlight and do not expose to temperatures above 50 C. Do notpierce or burn the can even after use. Store as flammable liquid.Note: Elevated temperatures will reduce shelf life dramatically.\r\nCompressive Strength: 5 N/cm (DIN 53421) at 10 % stress.\r\nTensile Strength: 18 N/cm (DIN 53455)\r\nElongation at Break: Elongation At Tension – 30 % (DIN 53455)\r\nShear Strength: 8 N/cm (DIN 53422)\r\nDimensional Stability: Full Load Bearing Stability – App, 12 hours (20 mm bead)\r\nThermal Resistance: Thermal Conductivity – 0.04 W/Mk (DIN 52612)\r\nWater Absorption: 0.3 Vol % (DIN 53428)\r\nAmbient Air Temperature: 5 C – 25 C. (Optimum 20 C)\r\nCutting Time: 20 mins to 1 hour depending on bead dimensions.\r\nTack Free Time: Approx. 8 minutes\r\n\r\nWhat is included:\r\n\r\n12 xEVGF7 Gun Grade Expanding Foam 750ml (12 Cans)\r\n\r\n